Regular joint compound is one of many materials that you can use to renovate your bathroom. Before you use it in your bathroom, make sure to know how to properly apply it.
In a bathroom, you can use regular joint compound. Paint that is water-resistant can be used to cover the joint compound, since it is not waterproof. The top coat creates a barrier that will protect the joint compound from the moisture in the bathroom. You must prevent mold growth on damp walls.
Why do you need to waterproof your joint compound?
Bathrooms are prone to moisture and humidity. You should waterproof your joint compound. Water damage can be caused by using regular joint compound alone.
Use a product that is waterproof and mold resistant to prevent this.
This barrier will protect your walls and keep moisture out.
Read the labels carefully before buying.
You’ll know that you are using the right products. Ask a professional home improvement for advice if you have any questions about joint compound and bathrooms before starting the project.
What paint should you use on top of a joint compound?
In a bathroom, use water-based paint over your joint compound. This type of paint adheres well and will protect your wall surfaces against water damage, mould growth, or any other issue that may arise from moisture on or in the air.
Use a water-based paint instead. It will adhere better and might even peel away from the wall over time.
Oil-based paints emit fumes which are hazardous to your health.
What type of joint compound should you use?
Joint compound that is all-purpose should be used in the bathroom. Lightweight products may cause problems such as peeling or cracking. These types of compounds have fewer binding agents.
All purpose compounds have a thicker consistency and are better able to stick to walls due to the higher adhesive content.
They can prevent moisture problems and help you maintain a barrier of waterproofing between your wall surfaces and air surrounding them.
How to Apply Joint Compound
Do the following before you start working with the joint compound:
- Make sure the room has adequate ventilation and that there are no flames in the vicinity.
- Inhaling fumes that cause nausea or dizziness is not recommended.
- Avoid any potential health risks by using a respirator.
Even application is essential for a proper joint compound application.
Use a trowel for thin coats. Avoid applying it too thickly as this could cause problems in the future.
When using this product, you will want to use smooth and even layers.
Use a putty blade instead of a tapeing knife when applying joint compound in the bathroom. This will make it easier to smooth down the mixture and spread it in one direction.
The better the result, the more time you will spend in this step. This is because the joint compound will stick to the surface of the wall.
After you have applied a uniform coat of joint compound it is time to sand.
Use a hand or orbital sander for smoothing out the compound.
If you are applying joint compound to a bathroom, make sure that a fan is always running.
This will speed up the process of drying and stop moisture from causing bubbles.
You should also avoid applying joint compound in high humidity. It will take longer to dry, and this could cause problems later.
Consult a professional if you are not familiar with the use of joint compound before beginning your bathroom renovation.
You can get help from them to choose the best products and receive instructions on how you should apply them. This will prevent any future problems.
The conclusion of the article is:
Use a joint compound that is suitable for bathroom use, but take precautions.
You can protect your drywall against any damage caused by humidity and moisture by knowing what products to use, and how to properly apply them.